Fire alarm panel FG04 - 2 Zone

Fire alarm panel

FG04 - 2 Zone


Download Enquiry Now Buy Now

Microprocessor Based Smart Fire Alarm System

Built-in Emergency Speech Dialer with 8 Numbers & 1/ 2 Messages [Optional]

Two zone/ four zone/ eight zone/ sixteen zone panel complies to IS 2189:2008 [Tested by ERTL(N)]

2 X 16 character backlit LCD display

Lamp test, silence/ acknowledgement feature

Complete with integral SMPS and battery charger for a sealed lead acid battery

NO/NC contacts for both fire and fault

LCD and LED Indication for Open, Short, Isolate, Fire in each zone

Maximum nos. of Detectors in each zone is 20

Automatic changeover arrangement to standby supply with battery charger with low battery indication

Fault/ failure indication such as MAINS FAIL, short, open, Battery FAIL etc

Built-in panel buzzer with smart features

Capability to interface external auto dialer (GSM/ PSTN) for generating calls in case of faults (open, short etc)

CMS compatible

Automatic ‘smart’ zone isolation along with hard isolation through toggles for ease of use

Electrical Specification  
Operating Voltage 24 volts DC
Stand by Batteries 24 volts DC (2 X 12 volt DC)
Stand by current 200 mA
Power Supply  
Mains 90-260 Volts 50 Hz to the internal SMPS for high voltage fluctuation tolerance
Input 24-28 volt from internal SMPS.
Output 24 volt DC ; 12 volt DC. (Regulated)
Charging Voltage 28 volts DC.
End of Line Resistor 4.7 K Ohm.
Environmental Operating Limits  
Protection Built-in surge protector for protection from high voltage spikes
Dimensions (mm)  
Length x Width x Height 97 x 345 x 275
Net Weight 3.400 Kg. ± 100 gm
Gross Weight 3.700 Kg. ± 100 gm
Material 1.6 / 1.8 mm CRCAsheet duly powder coated for better durability even in harsh environments
Cable Entry From top and back (20 mm knock outs)
No. Of Zones 2/4/8/16 zones (Provision to expand)
Internal Sounders Continuous buzzer for the fault condition, intermittent buzzer for the fire condition
External Output  
Sounder Output Common hooter output for zones
Aux. Relay Output 2 individual relay O/P for fire and fault
Tested By ERTL (N) as per *IS 2189:2008*